Established in 1942
+7 (846) 3-741-741 ext. 138
Since 1942 Strommasina Corp. has been successfully producing equipment for the mining, building, oil and gas, as well as road, metallurgical industries.

Bag filters made of modern filtration materials

Over recent years, many enterprises have paid special attention to the reduction of environmental load on the environment. Pollution of the environment with various solid substances causing habitat degradation and affecting human health is one of the most acute problems facing Russia today. For this reason, requirements for dust concentrations at the outlet of dust and gas collecting systems become more stringent.

Electrostatic precipitators and bag filters are the most common type of dust and gas collecting equipment employed by Russian enterprises.

However, in some cases, it is impractical from an economic standpoint to replace electrostatic precipitators with similar electrostatic cleaning devices especially when it comes to complete replacement of worn-out equipment or new construction. One of the most economically viable trends in the design and manufacture of dust and gas collecting equipment is a significant increase in the use of bag filters. Bag filter characteristics are very close to those of electrostatic precipitators. However, bag filters surpass ESP in terms of residual dust content.

Bag filters are used more often due to the fact that new filtering materials with high thermal and chemical resistance appear in the market.

The use of pleated filtration materials increases filtering area several-fold, while overall dimensions remain unchanged. As a result, they involve the lowest possible RUB/ filtration area square meter of ratio. This all makes it possible for our customers to save significantly on retrofitting costs and new projects.

Strommashina Samara plant manufactures and supplies jet-pulse and reverse air filters of different sizes and different efficiency. Residual dust concentration at the outlet will not exceed 10mg/cubic meter. Thus, compliance with applicable emission limit values is achieved.

Please click on the following link for more details about our dust and gas collecting equipment

Comments