Established in 1942
+7 (846) 3-741-741 ext. 138
Since 1942 Strommasina Corp. has been successfully producing equipment for the mining, building, oil and gas, as well as road, metallurgical industries.

Concrete paver capacity calculation

Construction and reconstruction of buildings and facilities needs large quantity of prefabricated reinforced concrete items. To fulfill this task successfully the Samara Strommashina plant offers reliable high-quality equipment of its own manufacture –  concrete placing machines and concrete-pouring machines. Having vast experience in designing and manufacture of industrial equipment, the team of Strommashina will provide all necessary technical assistance and help in selection of equipment which would match your needs exactly.

The machines for pouring concrete into molds perform two functions usually: they transport concrete mix from the location where it is loaded to molding unit and place it into the mold.

In terms of the concrete mix placing these machines are divided into two types: concrete-pouring machines and concrete placing machines. The concrete placing machines not only deliver the concrete mix, but also spread it. Some designs of concrete placing machines are equipped with a screeding device which can compact the mix in some cases. There are concrete placing machines equipped with a mix trowelling device in the screeding device. In terms of application the machines can be divided into two categories: universal and special.

Concrete placing machine SMZ528  It is designed for placing concrete and mortar mixes into molds of items of different designs up to 5200 mm wide in reinforced concrete structures.

The width of the products being molded is regulated using a slewing lifting and lowering hopper located under the bin by means of longitudinal movement of the concrete placing machine and transversal movement of the bin.

The concrete placing machines carry out preliminary trowelling of the upper open surface.

The screeding device is installed under the feeder. It is a driven slewing hopper hinged on side members. Position of the screeding device is regulated based on the width of the products being molded.

The drives are powered via a flexible cable installed on a special hanger. The latter consists of a bracket attached to a portal frame and rings used for hanging the cable on the rope.

Concrete placing machine SMZ69V It is designed for placing concrete and mortar mixes into molds of items of different designs up to 3600 mm wide in reinforced concrete structures.

The width of the products being molded is regulated using a slewing lifting and lowering hopper located under the bin by means of longitudinal movement of the concrete placing machine and transversal movement of the bin for concrete placing machine СМЖ 166B and СМЖ 528, using the hopper with repositionable walls for СМЖ 69Б.
The concrete placing machines carry out preliminary trowelling of the upper open surface.


Working capacity is calculated for specific machine operation conditions taking into consideration all downtimes, including accidental and operational downtimes, based on the following formula:
Cw = C/illegible/кd = m3/h, Cw = 27.59 • 0.87 = 24 m3/h
where kd is the static factor taking into consideration decrease of capacity due to downtimes during a shift, kd = 0.85…0.9.


The Strommashina plant specialists are ready to carry out the concrete placing machine capacity calculation and select the optimum type of equipment for your production.

Comments